AdaptivMount and TPX Detector Set Up on Kawasaki Ninja 650

Found some old pictures that we took when we were setting up the Ninja 650 when we got it this last summer.

We used AdaptivMount Control Mount on the left control housing.  We first removed the stock pinch bolts on the bike:

Then we installed the "base" of the Control Mount along with the supplied spacers and extended screws:

That's it.  Simple as that.

Now onto the TPX Detector.  First, we connected the Wiring Harness directly to the battery terminals:

Next, we placed the Visual Alert on top of the gauge cluster using the supplied double-sided tape:

Now we connect the Visual Alert to the Wiring Harness:

Now we tidy up the wires:

And we are done!  It's as easy as that!